Booster 98mm motor mount parts

Underside of bottom bulkhead on booster electronics bay

Inside the booster electronics bay

Booster electronics bay bulkhead with ejection charge holders and recovery system attachment points

Fin parts

Fins ready for balsa inserts to be glued in place

Fins with balsa inserts on leading and trailing edges

Vacuum bagging setup to apply two layers of fiberglass

Fins epoxied to 98mm motor mount tube

Airfoil fins attached

Fins epoxied to 98mm motor mount tube


Interstage design and assembly

Another view

Top view of interstage rails

Another view

Upper section of booster

Completed booster

Copyright VA Rocketry 2017

All Rights Reserved