Fiberglass nosecone and coupler

3/8" Baltic birch plywood fin before carbon fiber and fiberglass veil are applied

Finished fin

6" phenolic airframe before being wrapped with carbon fiber and epoxy

Vacuum bagging the airframe tubes

75mm motor tube and plumb line

Ready to epoxy first fin in place.

Aligning fins with plumb line

Two fins epoxied in place

Four fins epoxied to the 75mm motor mount tube

Fin root joint reinforced with Kevlar tape and epoxy

Two part foam to fill the void between between motor mount tube and airframe.

Prepped for aft centering ring.

Copyright VA Rocketry 2017

All Rights Reserved